User Tools

Site Tools


products:wizfi310:wizfi310ds:4.pindescription

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
products:wizfi310:wizfi310ds:4.pindescription [2016/09/05 13:08]
cliff [Pictures]
products:wizfi310:wizfi310ds:4.pindescription [2018/05/15 18:04] (current)
felix [Pin Description]
Line 8: Line 8:
  
 ^   ​No ​ ^  Name  ^  Type  ^  Description ​ ^ ^   ​No ​ ^  Name  ^  Type  ^  Description ​ ^
-^  1  |  GND  |  -  | Groud |+^  1  |  GND  |  -  | Ground ​|
 ^  2  |  RF_OUT ​ |  -  | 2.4GHz RF output | ^  2  |  RF_OUT ​ |  -  | 2.4GHz RF output |
-^  3  |  GND  |  -  | Groud |+^  3  |  GND  |  -  | Ground ​|
 ^  4  |  VDDIO  |  -  | 3.3V for Digital IO or Digital blocks | ^  4  |  VDDIO  |  -  | 3.3V for Digital IO or Digital blocks |
 ^  5  |  JTAG_CLK ​ |  -  | For normal operation, if JTAG is not used, this pin can be left unconnected (NC) | ^  5  |  JTAG_CLK ​ |  -  | For normal operation, if JTAG is not used, this pin can be left unconnected (NC) |
Line 19: Line 19:
 ^  10  |  NC(ADC) ​ |  -  | - | ^  10  |  NC(ADC) ​ |  -  | - |
 ^  11  |  Reset  |  -  | Module reset pin(Active low) | ^  11  |  Reset  |  -  | Module reset pin(Active low) |
-^  12  |  NC(GPIOA0) ​ |  -  | Groud |+^  12  |  NC(GPIOA0) ​ |  -  | Ground ​|
 ^  13  |  NC(GPIOA1) ​ |  -  | - | ^  13  |  NC(GPIOA1) ​ |  -  | - |
 ^  14  |  NC(GPIOA2) ​ |  -  | - | ^  14  |  NC(GPIOA2) ​ |  -  | - |
Line 31: Line 31:
 ^  22  |  VCC 3.3V  |  -  | 3.3V power supply | ^  22  |  VCC 3.3V  |  -  | 3.3V power supply |
 ^  23  |  TXD  |  -  | Serial data communication interface send | ^  23  |  TXD  |  -  | Serial data communication interface send |
-^  24  |  RTS  |  -  | Serial flow control pin, ready to receive data/ request the other party to send data (Active low) | +^  24  |  RTS  |  -  | Serial flow control pin, ready to receive data/​request the other party to send data (Active low) | 
-^  25  |  CTS  |  -  | Serial flow control pin, ready to send data/ request each other to send data (Active low, High level cannot send / Low level can send data) |+^  25  |  CTS  |  -  | Serial flow control pin, ready to send data/​request each other to send data (Active low, High level cannot send/Low level can send data) |
 ^  26  |  RXD  |  -  | Serial data communication interfece receive | ^  26  |  RXD  |  -  | Serial data communication interfece receive |
 ^  27  |  NC(GPIOC7) ​ |  -  | - | ^  27  |  NC(GPIOC7) ​ |  -  | - |
products/wizfi310/wizfi310ds/4.pindescription.txt · Last modified: 2018/05/15 18:04 by felix