User Tools

Site Tools


products:wizfi250:wizfi250pg:examples-association


Examples - Association & Disassociation



Station Mode using WPA2 Static IP


This section explains how to connect to AP using WizFi250 with static IP address. In this example, target AP information is as below. ( SSID : WizFiDemoAP, Security : WPA2, Key : 12345678 )

AT   				(Sent AT command with 0x0d (Hex of Enter button))
[OK] 		 	 	(Response meaning successful execution)

AT+WSET=0,WizFiDemoAP	(AT command for setting WiFi association)
[OK]

AT+WSEC=0,WPA2,12345678	(AT command for setting WiFi security)
[OK]

AT+WNET=0,192.168.12.101,255.255.255.0,192.168.12.1	(AT command for setting Static IP address)
[OK]

AT+WJOIN			(AT command executing AP association)
Joining : WizFiDemoAP
Successfully joined : WizFiDemoAP

[Link-Up Event]
  IP Addr    : 192.168.12.101
  Gateway   : 192.168.12.1
[OK]

AT+WLEAVE			(AT command making disassociation from AP association)

[Link-Down Event]
[OK]


2013/09/04 13:20 · jeonggw


Station Mode using WPA2 DHCP


This section explains how to connect WizFi250 to target AP with DCHP Client Mode

AT   				(Sent AT command with 0x0d (Hex of Enter button))
[OK] 				(Response meaning successful execution)

AT+WSET=0,WizFiDemoAP	(AT command for setting WiFi association)
[OK]

AT+WSEC=0,WPA2,12345678	(AT command for setting WiFi security)
[OK]

AT+WNET=1	(AT command for setting DHCP)
[OK]

AT+WJOIN			(AT command executing AP association)
Joining : WizFiDemoAP
Successfully joined : WizFiDemoAP

[Link-Up Event]
  IP Addr    : 192.168.12.13
  Gateway   : 192.168.12.1
[OK]

AT+WLEAVE			(AT command making disassociation from AP association) 

[Link-Down Event]
[OK]


2013/09/04 13:20 · jeonggw


AP Mode using WPA2 Static IP


This section explains how to set AP mode using WizFi250. In AP mode, WizFi250 have to set static IP address. (AT+WNET=0,xxx,xxx,xxx) After setting AP mode, WizFi250 will operate DHCP Server. Thus, when smart phone or other devices connect to WizFi250, WizFi250 will give IP address to connected device.

AT   				(Sent AT command with 0x0d (Hex of Enter button))
[OK] 				(Response meaning successful execution)

AT+WSET=1,WizFi250_AP	(AT command for setting WiFi association information)
[OK]

AT+WSEC=1,WPA2,12345678	(AT command for setting WiFi security)
[OK]

AT+WNET=0,192.168.12.105,255.255.255.0,192.168.12.1	(AT command for setting Static IP address)
[OK]

AT+WJOIN			(AT command executing run AP mode)
Joining : WizFi250_AP

[Link-Up Event]
  IP Addr    : 192.168.12.105
  Gateway   : 192.168.12.1
[OK]

AT+WLEAVE			(AT Command disassociating from AP association) 

[Link-Down Event]
[OK]


2013/09/04 13:20 · jeonggw


products/wizfi250/wizfi250pg/examples-association.txt · Last modified: 2015/03/16 10:33 (external edit)