User Tools

Site Tools


products:w5100s:start

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
products:w5100s:start [2018/03/29 16:38]
ekkim [Software]
products:w5100s:start [2019/05/15 15:22] (current)
midnightcow
Line 1: Line 1:
-===== W5100S ===== +====== W5100S ​====== 
-==== Overview ====+===== Overview ​=====
 {{:​products:​w5100s:​w5100s_pm.png?​400|}} {{:​products:​w5100s:​w5100s_pm.png?​400|}}
  
  
-The W5100S ​chip is a Hardwired ​TCP/​IP ​embedded Ethernet controller that enables easier ​internet ​connection for embedded ​systems ​using SPI (Serial Peripheral Interface). W5100S ​suits users in need of stable internet connectivity best, using a single chip to implement ​TCP/​IP ​Stack, ​10/100 Ethernet MAC and PHY. + 
-Hardwired ​TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE, …, which has been proven through various applications over many years. W5100S ​uses a 16Kbytes ​internal ​buffer as its data communication ​memoryBy using W5100S, users can implement the Ethernet application ​they need by using simple ​socket ​program instead of handling a complex Ethernet ​Controller. It is possible to use 4 independent hardware sockets simultaneously+W5100S is an embedded Internet controller designed as full hardwired ​TCP/​IP ​with WIZnet technology. W5100S provides ​internet ​connectivity to your embedded ​system by using SPI (Serial Peripheral Interface) ​or Parallel System BUS. 
-SPI (Serial Peripheral Interface) is provided for easy integration with the external MCU. The W5100S ​SPI supports 70 MHz speed …and the new efficient SPI protocol and it is also support indirect Bus, so users can implement high speed network communication. In order to reduce power consumption of the system, W5100S ​provides WOL (Wake on LAN) and a power down mode.+SPI and Parallel System BUS provide easy connection via external MCU to W5100S
 +The clock speed of W5100S SPI supports upto 70MHz and the Parallel System Bus supports higher speed network communication than SPI. 
 + 
 +Since W5100S integrates the Hardwired ​TCP/​IP ​stack with 10/100 Ethernet MAC and PHY, it is truly a one-chip solution for the stable internet connectivity
 +WIZnet’s hardwired ​TCP/IP stack supports TCP, UDP, IPv4, ICMP, ARP, IGMP, and PPPoE - and it has been proven through various applications over the last decade 
 + 
 +W5100S ​provides four independent SOCKETs to be used simultaneously and 16KB internal ​memory for data communication. 
 +Users can develop an Ethernet application ​easily ​by using the simple ​W5100S SOCKET ​program instead of handling a complex Ethernet ​controller.  
 +W5100S also provides WOL (Wake on LAN) and a Power Down Mode in order to reduce ​power consumption. 
 + 
 +W5100S is a low-cost chip that exceeds its predecessor,​ W5100.  
 +Existing firmware using W5100 can be used on W5100S without modification.  
 +W5100S has two types of packages, 48 Pin LQFP & QFN Lead-Free Package. 
  
 {{ :​products:​w5100s:​w5100s_diagram.png?​400 |W5100S Block diagram}} {{ :​products:​w5100s:​w5100s_diagram.png?​400 |W5100S Block diagram}}
    
 ---- ----
-==== Features ​====+===== Pin MAP =====
  
-  ​*Support Hardwired Internet ​protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE +<WRAP center centeralign>​ 
-  * Support 4 independent ​SOCKETs simultaneously +{{:​products:​w5100s:​w5100s_pinmap.png?​400|W5100S Pin map}} 
-  * Support SOCKET-less ​command: ARP-Request, ​Ping-Request + 
-  * Support Ethernet Power down mode & Main Clock gating for power save+</​WRAP>​ 
 +---- 
 +===== Features ===== 
 + 
 +  ​*Support Hardwired Internet ​Protocols: TCP, UDP, WOL over UDP, ICMP, IGMPv1/v2, IPv4, ARP, PPPoE 
 +  * Support 4 Independent Hardware ​SOCKETs simultaneously 
 +  * Support SOCKET-less ​Command: ARP-Request, ​PING-Request 
 +  * Support Ethernet Power Down Mode & Main Clock gating for power save
   * Support Wake on LAN over UDP   * Support Wake on LAN over UDP
-  * Support Serial & Parallel Host Interface: High Speed SPI(MODE 0/3), System Bus with 2 Address signal & 8bit Data +  * Support Serial & Parallel Host Interface: High Speed SPI(MODE 0/3), Parallel ​System Bus with 2 Address signal & 8bits Data 
-  * Internal ​16Kbytes ​Memory for TX/ RX Buffers ​+  * Internal ​16 Kbytes ​Memory for TX/ RX Buffers ​
   * Not support IP Fragmentation   * Not support IP Fragmentation
   *  Not Maintain ARP-cache Table    *  Not Maintain ARP-cache Table 
   * 10BaseT/​100BaseTX Ethernet PHY Integrated   * 10BaseT/​100BaseTX Ethernet PHY Integrated
-  * Support Auto Negotiation (Full and half duplex, 10 and 100-based ​+  * Support Auto Negotiation (Full/Half Duplex, 10/100 Speed
-  *  Support ​Auto Auto-MDIX when Auto-negotiation mode.+  *  Support Auto-MDIX when Auto-Negotiation Mode.
   * 3.3V operation with 5V I/O signal tolerance   * 3.3V operation with 5V I/O signal tolerance
-  * LED outputs (Full/​Half ​duplex, Link, 10/100 Speed, Active)+  * LED outputs (Full/​Half ​Duplex, Link, 10/100 Speed, Active)
   * Two types of packages: 48 Pin LQFP & QFN Lead-Free Package (7x7mm, 0.5mm pitch)   * Two types of packages: 48 Pin LQFP & QFN Lead-Free Package (7x7mm, 0.5mm pitch)
  
 ---- ----
-==== Target Application ====  +===== Target Application ​=====  
-  * User product based on W5100 : No modify ​firmware+  * User product based on W5100 : No need to modify ​Firmware
   * Home Network Devices: Set-Top Boxes, PVRs, Digital Media Adapters   * Home Network Devices: Set-Top Boxes, PVRs, Digital Media Adapters
   * Serial-to-Ethernet:​ Access Controls, LED displays, Wireless AP relays, etc.   * Serial-to-Ethernet:​ Access Controls, LED displays, Wireless AP relays, etc.
Line 41: Line 61:
   * Medical Monitoring Equipment   * Medical Monitoring Equipment
   * Embedded Servers   * Embedded Servers
-  * Internet of Thing (IoT) Devices+  * Internet of Things ​(IoT) Devices
   * IoT Cloud Devices   * IoT Cloud Devices
- 
----- 
-==== Document ====  
-=== Datasheet === 
-  * [[:​products:​w5100S:​datasheet|W5100S Datasheet]] 
- 
-=== Hardware design guide === 
-  * [[:​products:​w5100s:​refschematic|W5100S Reference Schematic]] 
-  * [[:​design_guide:​package:​start|Package Information]] 
-  * [[:​design_guide:​irreflow:​start|IR Reflow Profile]] 
-  * Crystal selection guide 
-    * {{ :​products:​w5100s:​w5100s_crystal_selection_guide-english.pdf |}} 
-    * {{ :​products:​w5100s:​w5100s_crystal_selection_guide-korean.pdf |}} 
-=== Comparison sheet === 
-  * [[:​products:​w5100S:​comparison|Comparison sheet]] 
- 
-=== Application note === 
-  * [[:​products:​w5100S:​application:​tcp_function|W5100S TCP Function]] 
-  * [[:​products:​w5100S:​application:​udp_function|W5100S UDP Function]] 
-  * [[:​products:​w5100S:​application:​ipraw|W5100S Application Note (IPRAW)]] 
-  * [[:​products:​w5100S:​application:​pppoe|W5100S Application Note (PPPoE)]] 
-  * [[:​products:​w5100S:​application:​slc|W5100S Application Note (SLC)]] 
-  * [[:​products:​w5100S:​application:​interrupt|W5100S Application Note (Interrupt)]] 
- 
----- 
-==== Software ==== 
-=== Driver === 
-  * [[https://​github.com/​Wiznet/​ioLibrary_Driver|ioLibrary]] 
-=== Example === 
-  <WRAP center round important 60%> Not yet . But W5100S ​ is compatible with W5100. Refer to W5100 firmware</​WRAP>​ 
- 
-  *TCP 
-  *UDP 
  
 ---- ----
products/w5100s/start.1522309113.txt.gz · Last modified: 2018/03/29 16:38 by ekkim